harry strasil
01-14-2008, 2:45 AM
This is my new drill press attachment to vacum the shavings while I am drilling. Its just a mid size wide floor attachment with a small 20 lb pull magnet bolted to what was the top side, now the bottom and the shop vac hose inserted into it. It stores on the drill press topcover when not in use or on the drillpress column.
http://traditionaltools.us/cms/modules/coppermine/albums/userpics/10014/drill_vacum_nzle_01.jpeg
http://traditionaltools.us/cms/modules/coppermine/albums/userpics/10014/drill_vacum_nzle_01.jpeg