Dan Hintz
01-12-2008, 12:45 PM
This one is probably aimed more towards Chinese machine owners...
Anyone come across some high-voltage, single-pin, press-fit connectors for the tube anodes/cathodes? I will most likely end up making my own from some silicone tubing, but if there's an easier solution out there... I know they exist, I just haven't found any purchasable in onesies and twosies so far.
Anyone come across some high-voltage, single-pin, press-fit connectors for the tube anodes/cathodes? I will most likely end up making my own from some silicone tubing, but if there's an easier solution out there... I know they exist, I just haven't found any purchasable in onesies and twosies so far.