Harry Radaza
01-09-2008, 9:33 PM
I have a Universal VL300 which has performed really well for me in the past. I've had it for about 2 years now and work with a variety of materials but mostly wood and shells.
We noticed the following lately:
1) On high volume jobs, after machine shutdown and cleaning, upon startup again, printing the same file, the alignment when printing on the left side of the table would be off by around 1mm - 2mm, and this decreases as you go to the right side of the table.
2) On all jobs involving vectors, some objects would either be:
a) missing,
b) faded print
c) printed with dots
3) I've also seen something as simple as making a square pattern on paper and sections of the square would be missing. But keep in mind the square is one whole continuous vector object.
Please help. This problem has caused great losses to my productivity. Are these laser tube symptoms ? But if so, it still does not explain # 1.....
We noticed the following lately:
1) On high volume jobs, after machine shutdown and cleaning, upon startup again, printing the same file, the alignment when printing on the left side of the table would be off by around 1mm - 2mm, and this decreases as you go to the right side of the table.
2) On all jobs involving vectors, some objects would either be:
a) missing,
b) faded print
c) printed with dots
3) I've also seen something as simple as making a square pattern on paper and sections of the square would be missing. But keep in mind the square is one whole continuous vector object.
Please help. This problem has caused great losses to my productivity. Are these laser tube symptoms ? But if so, it still does not explain # 1.....