John Weber
02-26-2004, 3:32 PM
I hooked up my Uncle up with a motor for one of the small Lee Valley narrow belt sanders. Nice little package. The Lee Valley sander is well made and a typical good value. For anyone looking for a belt sander and has a motor lying around it’s hard to beat for 50ish bucks.
John
<img src=http://www.weberwoodworking.com/BadgerPond/lvs1.JPG>
<img src=http://www.weberwoodworking.com/BadgerPond/lvs2.JPG>
<img src=http://www.weberwoodworking.com/BadgerPond/lvs3.JPG>
Edit:
Sorry about the large pics size - should be fixed now.
Also the motor is a Rockwell 1/3 hp reversible. One toggle switch turns it on and off and the other changes direction. It was the last one I had, so not I'm trying to sell anything, just that the sanding frame is well worth the cost.
John
John
<img src=http://www.weberwoodworking.com/BadgerPond/lvs1.JPG>
<img src=http://www.weberwoodworking.com/BadgerPond/lvs2.JPG>
<img src=http://www.weberwoodworking.com/BadgerPond/lvs3.JPG>
Edit:
Sorry about the large pics size - should be fixed now.
Also the motor is a Rockwell 1/3 hp reversible. One toggle switch turns it on and off and the other changes direction. It was the last one I had, so not I'm trying to sell anything, just that the sanding frame is well worth the cost.
John