Robert Bassett
01-05-2008, 3:37 PM
Got myself a Hitachi SB10Y combination 4×36” belt and 8 ” disk. Built like a tank.
I bought a five-drawer tool chest base that Sears had for clearance. Put a 3/4 ply top on it and then put two 2×6’s across the long part of the top. Put my 10” Drill Press on one end and the Makita on the other.
Now I have a place for the drill press stugg and room for other stuff, also.
I bought a five-drawer tool chest base that Sears had for clearance. Put a 3/4 ply top on it and then put two 2×6’s across the long part of the top. Put my 10” Drill Press on one end and the Makita on the other.
Now I have a place for the drill press stugg and room for other stuff, also.