Brian Robison
01-02-2008, 9:51 AM
Hi Creekers,
I had an issue with my blower I thought I'd bring up.
I was lasering some wood plaques and noticed the smoke wasn't evacuating as well as in the past. I started investigating and found the problem right away. There is a slotted inlet on the blower that had some materials, paper and residue blocking the path. Just something to check every now and then.
I had an issue with my blower I thought I'd bring up.
I was lasering some wood plaques and noticed the smoke wasn't evacuating as well as in the past. I started investigating and found the problem right away. There is a slotted inlet on the blower that had some materials, paper and residue blocking the path. Just something to check every now and then.