MDF to Melamine

[Dave Tinley]

I am building a aux. table for my bandsaw and am using 3/4 melamine and 1/2 mdf.
What glue do y'all recommend to bond those two surfaces together? Do I need to scuff up the melamine to assure adhesion?

Thanks

Dave

[Todd Burch]

Polyurethane is what I'd use. Scuffing melamine would be good too. Todd.

[Rob Sandow]

I had a bad experience trying to use poly glue on melamine. I would try epoxy.

Rob

[Jim Izat]

I might think about running a couple half inch dadoes down the long axis of both sheets and use a couple splines. Poly would probably do okay there. For gluing the surface I'd probably use my belt sander to remove the laminate and glue substrate to substrate.

Jim Izat

[Paul Kunkel]

Titebond melamine glue or better- Roo glue. Use Roo all the time in my melamine cabinets. Just a little and its together forever!