View Full Version : PC330 sander
Randy Cohen
12-31-2007, 11:53 AM
the pad on my sander came off the sander and i need to replace it. has anyone done this? are there other parts I should order at the same time?
and since when does dewalt own everything?
John Thompson
12-31-2007, 1:48 PM
I have replaced on a 333.. I see no need to get other parts unless you need them. I've had a 333 for 6 years and it has kept going even though I acquired a Metabo 6" and Bosch 5".
The Bosch 5" was simply because I made the mistake of laoning my 333 to a young lady who said she had a small sanding job. The job turned out to be an entire home she purchased that whoever patched the sheet-rock did not smooth it after slapping it on.
It came home gummed and I saw an obituary.. As it turned out after blowing it out with a stream of air from a compressor, it's still churning away on machine tops, etc. at this point.
Sarge..
Steve Clardy
12-31-2007, 2:03 PM
Just bought a replacement pad from Amazon. $10. something
Randy Cohen
12-31-2007, 2:17 PM
Just bought a replacement pad from Amazon. $10. something
didn't even think of doing that:(
yeah so i went to amazon and found it for half the price that i paid at the B&D/Dewalt/PC/Delta website. o well.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.