Curt Fuller
12-30-2007, 11:30 PM
Anyone ever had Minwax wipe on poly or spray can polyurethane go cloudy on them. I used Minwax wipe on poly (gloss) over some deft sanding sealer on a coat rack I built and everything was fine. I put two coats on it over two days and then decided to spray a coat of the regular spray can fast drying polyurethane (semi-gloss). A couple hours later when I went back to look at it the finish had gone cloudy. I tried sanding it with some 400 grit the next day and re-coating with spray poly and it went cloudy again. Is there some sort of reaction between wipe on poly and the spray stuff? I'd sure hate to have to sand back to bare wood on this thing. I might have to paint it or something.