wtb new unifence indicator?

[keith micinski]

I need to get a new clear indicator for my fence and I cant' seem to find any parts on delta's web site. If they make the unifence how come I can't find any parts for it on there web site?

[Jim O'Dell]

Last couple times I tried to look up parts there, it was a pain in the tookus.:rolleyes: Do yo have the owner's manual with the exploede parts list to get the part number? If not, do a search for Delta parts on your favorite search engine and you'll find several outlets that you can purchase parts from. Might be able to get a part number, then call Delta to see what their price is. And don't discount Sears parts either. I was looking for the speed control circuit board for my PC router, and Sears had the best price of anyone by about 3.00! Jim.

[Cary Falk]

The plastic curser is part number 400063750002 and according to Delta's website it is $20.22. See if this link works for you.
http://www.dewaltservicenet.com/Products/DocumentView.aspx?productid=56210&typeId=10997&documentId=29954

[keith micinski]

Thank you, they sure are proud of parts for that unifence.

[Doug Jones from Oregon]

I may have a new one that I had as a spare, they break so easy. I can look tomorrow and let you know. Don't need it since I've sold that saw.

Doug

[Scott Hubl]

MikesTools.com has the Uni Curser for $20.22 and can be found on there website , just type Unifence in there "search" box.
http://www.mikestools.com/Default.aspx

[Rick Potter]

I thought the extremely fine line on my original one was very hard to read, so I called the number on the owners manual and complained, and they sent me a new one....free.

Rick Potter

[Chris Rosenberger]

Just to note. There are 2 different styles of the cursors (indicators) for the Unifence. Be sure you get the correct one. The original one had screw slots in the edge. Part # 400-06-375-0001. The current one has screw slots in the top. Part # 400-06-375-0002.

[Doug Jones from Oregon]

Keith...I found the one I thought I had, right where it should have been! It is the style with the screw slots in the top...for the older model fence.

Doug

[keith micinski]

Well I am almost positive I have the older style fence, it has the screw holes on the top but they are facing forward is that what you mean by top? What do you have to do to be able to post larger pics on this web site? They will only let me post a picture that is 107k and I have seen picture's larger then that in other peoples posts.

[Chuck Lenz]

I use to be a big fan of Delta tools, till recently, since I've seen the rediculous priceing of parts it's makeing me sick. $20 for that part is just plain unacceptable and highway robbery.

[keith micinski]

This is the first delta product I have ever bought and to be honest with you I have never liked anything from delta but I decided to take a chance since I was getting a pretty good deal on the saw and fence.