Michael McCoy
12-28-2007, 1:03 PM
I just milled this for some friends so they could turn it into a weather station with clock insert. Sometime over the weekend, they changed their minds and now want me to come up with a way to turn it into an end table for their enclosed porch.
I'm trying to get some ideas about making legs/support of some kind for this piece of cedar. I had originally thought about using some rough cut walnut in an "X" arrangement but I'd like to come up with some more options. Any ideas out there about what to do for legs on this thing? This piece was originally rough cut at a severe taper so it started at 4" on one end tapering down to 1 1/2" at the other. I was finally able to even it out at 1 1/4". As you can see from the pic, my hand tool bench is a little less than traditional. :)
I'm trying to get some ideas about making legs/support of some kind for this piece of cedar. I had originally thought about using some rough cut walnut in an "X" arrangement but I'd like to come up with some more options. Any ideas out there about what to do for legs on this thing? This piece was originally rough cut at a severe taper so it started at 4" on one end tapering down to 1 1/2" at the other. I was finally able to even it out at 1 1/4". As you can see from the pic, my hand tool bench is a little less than traditional. :)