Photograv 2.11 installed.... now what setting

[Ed Lang]

I just reinstalled Photograv 2.11 after seeing the post by Scott about his trouble with Photograv.

I have some notes on the speeds and other setting for my Universal M-300 50W laser but would like to get the proper setting from someone who knows what they should be.

Speed, turn time etc....

Thank you.

[Vicky Orsini]

I've had pretty good luck using Photograv's recommended settings for the individual file after it's been processed.

[James Jaragosky]

I generally need to size and brighten up a photo before running it in photograV 3.0
With glass and granite I use the suggested photograV settings
With birch and cherry I slow the speed down by half
You will need to get to know how your laser works with photograV's suggested settings, and after that you should be ok.

[Ed Lang]

Thanks folks but how about the speed setting and the slow corner speeds I have to enter into PhotoGrav the first time it is run?

[James Jaragosky]

Thanks folks but how about the speed setting and the slow corner speeds I have to enter into PhotoGrav the first time it is run?
Right from the spec sheet that came with the laser for most of the settings, and the rest i got off the manufacturers web site.
Jim J.