John Fruen
12-24-2007, 6:07 AM
Hi and merry Christmas to you all
i have a versa VL300 everything working OK until yesterday when i set up the rotation attachment sent the image to the driver which appeared on the Versa screen and pressed start.
the carriage moved into position and went through the motions but no firing laser. (with lid up red beam is present)
reverted to flat bed and the laser fires again.
Any suggestions would be appreciated.
John
i have a versa VL300 everything working OK until yesterday when i set up the rotation attachment sent the image to the driver which appeared on the Versa screen and pressed start.
the carriage moved into position and went through the motions but no firing laser. (with lid up red beam is present)
reverted to flat bed and the laser fires again.
Any suggestions would be appreciated.
John