keith ouellette
12-22-2007, 8:29 PM
Is it hard to sharpen jointer blades on a flat water stone. I have a 2000 and a 6000 grit?
Cliff Rohrabacher
12-22-2007, 8:56 PM
Is it hard to sharpen jointer blades on a flat water stone. I have a 2000 and a 6000 grit?
If the blades are like mine & made from high speed steel you won't have much luck. You can do it but be prepared for a long process. Diamond stones - a medium grit - will work somewhat faster.
You will need to build a little jug so's to keep the stone angle dead on and clamp the blade.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.