Oneway Live Center Adapter to 1" x 8

[Gilbert Vega]

Does anyone know where I can purchase a threaded adapter for the Oneway live center to allow a 1" x 8 chuck to be mounted? Thanks.

[Bill Stevener]

If I understand your question, you are looking to mount your chuck on the live center?? If this is the case, I would think an item of this nature will require special attention in a machine shop??

[EDDIE GLAZE]

Gilbert Try Bestwoodtools.com

[Steven Wilson]

If you need something custom made you can try Craft Supplies. I had them machine an adapter to allow me to use a 3 jaw metal working chuck on my Oneway (3 jaw is better than 4 jaw for holding mandrels).

[Tom Johnson Ohio]

Try Craft Supplies USA;
Item 130-2400 Oneway Revolving Center Adapter 1x8 TPI $38.99

[Gordon Seto]

The one from Oneway is more solid, made out of steel.

Gordon

[robert hainstock]

Try PSI. OOps said a bad word. :o
Bob

[Gilbert Vega]

Thanks guys for sources for the adapter.:)