PDA

View Full Version : 3D engraving files



Kim Uleberg
12-13-2007, 7:04 AM
With the spirit, on the laserpro site they have a couple of 3D engraving photos in grayscale. Do any of you know of a software or an easy way of turning other photos into 3D engraving ones? It is probably possible to do urself...but would think there was a software somewhere that converted it for you...

thank you

Kim c",)

David Lavaneri
12-14-2007, 12:21 PM
Kim,

There's a software for 2D and 3D images at type3.com but "easy" is a relative term.

Since grayscale controls the depth (dark=deeper, light=shallow) 2D images are relatively easy to generate, though 3D images will generally take a higher skill level on the part of the operator.

If you don't want to climb that learning curve, there are services, which will work with your images, for the purpose of 3D engraving.

David "The Stunt Engraver" Lavaneri