PDA

View Full Version : Leather Key Fob Vector



Peter Meacham
12-12-2007, 12:42 PM
Does anyone have vector art for key fobs - for use to engrave and cut out leather items. Thanks, Pete

Sandra Force
12-12-2007, 12:50 PM
What shape do you want, square; round; oval; unique. You can draw almost any shape for a key fob and add a section 5/8x1.25 to one end to put around the holder and rivet together. Just remember not to make the overall piece too large, guys don't like them in their pockets.:D

Peter Meacham
12-12-2007, 12:56 PM
Thanks Sandra. I was looking for the shape that the Tandy Leather kits have as shown in this Epilog Sample Club project.

http://www.epiloglaser.com/sc_keychain.htm

I should be able to draw this - but my Corel skills are not what they should be - still learning.

I have purchased a couple of pounds of leather scraps and keyrings and want to do some key fobs. Pete

Mike Null
12-12-2007, 1:43 PM
Pete
Try this. You can manipulate to size.

Peter Meacham
12-12-2007, 1:58 PM
Ah, thanks Mike. I was able to come up with one in the meantime but I can't figure out how to put an attachment to these posts.

Mike Null
12-12-2007, 2:30 PM
Pete

Under the body of the reply box there is an area called "manage attachments".

Click on that and you can search your pc for the file that you want, click open, upload and close. You'll be able to see the uploaded file before you close the window. Then submit your reply.

Peter Meacham
12-12-2007, 2:34 PM
OK, thanks - well, this is the one I drew up - saved in V10 -

Mike Null
12-12-2007, 3:58 PM
I'd say you've got it handled.