Tim Bateson
12-11-2007, 6:44 AM
I'm having a problem with the rotary setup for champagne flutes.
If I place the hold-down inside the lip, the base will be too high on the other end. If I hang the base over the other end, it weighs it down and I don't get good contact with the drive wheels.
Turning the flute around doesn't seem to work well either.
Advice please.
If I place the hold-down inside the lip, the base will be too high on the other end. If I hang the base over the other end, it weighs it down and I don't get good contact with the drive wheels.
Turning the flute around doesn't seem to work well either.
Advice please.