Andrew Nemeth
12-09-2007, 11:03 PM
I am finishing up refurbishing a 22 year old Jet cabinet saw and the last step is to adjust the fence. The saw has the older style tubular rails with micro adjust serrations on the bottom of the front tube. I think this system may be very similar to the Delta tubular rail system (the castings for the fence heads look almost identical). The fence tracks beautifully along the track with one fingers touch. The fence stays parallel when not locked but as soon as I throw the lever to lock it the back end of the fence moves off to the left. Unfortunately I don't have an old manual that includes the fence and I don't seem to see any obvious adjustment on the fence itself. Any idea on how to prevent the fence from kicking to the left when I lock it?