View Full Version : Simple Jewelry Box
Jon Lanier
12-08-2007, 3:48 AM
This is a a simple box I did for a friend. It is about 6 inches wide and about 2.75 inches high. Made from spalted walnut.
Tony Ward
12-08-2007, 7:15 AM
Jon
That is well done, thank you for sharing the image, how is the lid secured to the base?
Good Health
Ralph Okonieski
12-08-2007, 11:05 AM
Jon,
Very nice ! The wood is great ! Is that from one solid piece? Is the inside routed or cut with the band saw?
Jon Lanier
12-08-2007, 12:08 PM
Hey guys,
The lid sits flush with some with some cleats I made. The work was mostly done with a scroll saw. The sections were cut out, a drill hole in each section then the blade goes though the hole and the section cut out. It has a 1/8 maple bottom that was cut flush when I cut the outside.
I'd take more pictures of it but I sold it this morning for $40.00. :D
Lance Norris
12-08-2007, 12:57 PM
This is similar.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.