new tool

[Tony Wheeler]

before all these new Jets show up here is what I decided on it was a fight to get it unloaded when the guy that I let use my engine hoist didnt show with himself or my hoist. had to do it the hard way by hand me and my 6"5" neighbor got it off the trailer It didnt fall laid it on its side to put on legs when I had no help. these are the only pics I got since the LOML took the one with me in it guess what I camera is broke. the wood spinning is 19 1/2" at wides point and old dead dry hard did I say hard piece of Honey locust.
76594 76593

[Dale Gregory]

Nice Gloat! Mustard would have been my 1st choice if I had the $$ now. Still waiting on the Jet to arrive. Wish I had your shop space...I'm definately not finishing the basement of the next house we get!

Dale

[Tony De Masi]

Congrats Tony. You're gonna love that lathe. Make sure to let us see a pic of what becomes of that HL blank.

Tony

[David Fried]

If having to "settle" for mustard is the worse thing that ever happens to you then life is good! Congrats!!:D Nice chunk-o-wood too!

[Tony Wheeler]

after saving for years last winter I finally got to build shop 40x60 I also like hot rods now lets see if I can afford to heat it didn't mean to have a double gloat just still proud of wha tyears of hard work will get you

76599

[Steve Schlumpf]

Wow Tony!! Congrats on your new lathe and a new shop to put it in! Looks like it would have been a challenge to put the lathe together - glad to see you got it done! Looking forward to seeing what you turn out of that honey locust!

[Jon Lanier]

Congrats Tony! If I lived closer, you could have called on me, I'd been more than happy to help.

Now I want to see that Honey Locust finished. :D

[Ken Fitzgerald]

Congrats Tony! I'm sure it will serve you well!

[Rich Souchek]

Ssssssssssswwwwwwwwwwwwwwwweeeeeeeeeeaaaaaaaaatttt ttttttttt> :D

Double Sweet with shop.;)

Rich s.