View Full Version : Need hard maple fast.
keith ouellette
12-06-2007, 7:09 PM
Does anyone know a good and fast source for hard woods. I thought I had some good maple but there wasn't as much as I though and one piece was poplar. I don't care for my local source that much.
"Jason Belous"
12-06-2007, 7:14 PM
what's your location?
keith ouellette
12-06-2007, 7:44 PM
Good point. I am on the east coast of central Florida.
Dell Littlefield
12-06-2007, 8:09 PM
You might check with Hershell's Woodworks, Fort White FL. (386)497-1895.
Jack Norfleet
12-06-2007, 8:27 PM
Try Chipmunk Hardwoods
www.chipmunkhardwoods.com
Lee Koepke
12-06-2007, 8:40 PM
I have bought from McEwen Lumber too
http://http://www.hoodindustries.com/distribution/mcewen/locations/
they are in Orlando as well.
Thom Sturgill
12-06-2007, 9:21 PM
There;s a cabinet supply place in Vero Beach that carries a little bit of maple (hard and soft), red oak, and cherry. Also plywoods to match.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.