Jet JWL-1642-EVS2: 16" x 42" EVS Pro Lathe $1399 w/shipping from Rockler

[Jeffrey Schronce]

http://www.rockler.com/product.cfm?page=17111&sid=AFR38 (http://www.rockler.com/product.cfm?page=17111&sid=AFR38)

[Raymond Overman]

Yeah, at least three of us have ordered one this week.

[Jeffrey Schronce]

My trigger finger is so itchy. Was there a thread posted on it that I missed?

Thanks
Jeff

[David Parker]

WoodCraft also had this on sale last week for about the same price with free shipping. I made the big leap and ordered one last Sunday for my first lathe. To my surprise, I received a phone call yesterday telling me my lathe was in. I picked it up today, managing to get the 475 pound box (attached to a wood pallet) into my Santa Fe SUV. They loaded it in with a fork lift. Unloading it at home was fairly simple. I pulled it part way out of my SUV and cut away the cardboard box, leaving the lathe components attached to the pallet. I was then able to carry each part separately down to my basement workshop. A solo operation with no single part weighing more than 100 pounds.

I now have the pieces to a Jet 1642-EVS-2 sitting in my workshop. I just have to reorganize my workshop to make room for it and install a 230 volt outlet. I think I may just have a sub-panel installed so I can have a few 230 volt outlets on separate circuits in addition to some new 115 outlets. Time for a complete workshop remodeling!

Dave
Newbie turner

[Steve Schlumpf]

David - congrats on your new lathe! I know how heavy they are as I had to do the same thing to get mine into my basement shop. Hope you get power soon as you will love turning on it! Remember - lots of photos as soon as you can!