View Full Version : One more Excalibur Question
Sean Troy
11-29-2007, 9:56 PM
On the bottom of the 4" tube, will a 4" hose and clamp work or do I need a coupler then attach the hose to that? Tommorrow I start on the Cyclone. Thanks again, Sean
Rob Blaustein
11-30-2007, 1:53 PM
I think so, but I'll check for sure this evening.
Jim McFarland
11-30-2007, 2:25 PM
If I understand your question correctly -- no need for an adapter -- 4" hose and clamp work on the end of the 4" tube (arrow in photo points to the connection I believe you are referring to).
Sean Troy
11-30-2007, 3:09 PM
If I understand your question correctly -- no need for an adapter -- 4" hose and clamp work on the end of the 4" tube (arrow in photo points to the connection I believe you are referring to).
Thats the end I was asking about except mine does a 90 degree downward drop at that end.
Rob Blaustein
11-30-2007, 4:11 PM
Hose attaches directly onto yours as well--just need a clamp.
Sean Troy
11-30-2007, 4:57 PM
You guys are the best !!! Thanks for all the help. I just got finished hauling all the boxes for the DC in the shop. Unpacking and setup tommorrow after the Christmas parade my daughter's Girl Scout troop is in.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.