Ron ONeal
11-23-2007, 9:06 PM
I have a very old 12" cabinet saw made by Darra James. It is generally in excellent condition, but one of the nuts just stripped out. This is a brass/bronze cylinder 1" diameter about 2.5" long with the threaded hole 90 deg to the axis. The thrread is a .5" x 8tpi acme thread.
Does anyone know of a source for this part? I'm surre I can find a machine shop to make one for me, but at what cost.
Also, If you have any information about the manufacturer, I'd sure appreciate it.
Does anyone know of a source for this part? I'm surre I can find a machine shop to make one for me, but at what cost.
Also, If you have any information about the manufacturer, I'd sure appreciate it.