David Harvey
11-18-2007, 8:31 PM
Hi All,
Here's some tables I came up with this summer... I'm a little bored right now and thought I would post them.
I used Cut3D and VCarve and the Laser to make these. The CNC'ng was done on my shopBot and I did the design work in Corel and exported the parts as eps fpr VCarve. The clear acrylic inlays ( HIIMPACT stuff) I did on the laser and they have an engraved design around their edges to help with blending in with the table top.
Peg (wife...da boss:D) did all of the stain work. If you notice, on the 3D reliefs, she took the time to stain them in a different shade from what the table was to be done in. It created a nice effect and helped to empasize the 3D.
The pic's are a little rough...sorry
All three tables are made from Oak and assembly is with glue...no screws or fastners.
Here's some tables I came up with this summer... I'm a little bored right now and thought I would post them.
I used Cut3D and VCarve and the Laser to make these. The CNC'ng was done on my shopBot and I did the design work in Corel and exported the parts as eps fpr VCarve. The clear acrylic inlays ( HIIMPACT stuff) I did on the laser and they have an engraved design around their edges to help with blending in with the table top.
Peg (wife...da boss:D) did all of the stain work. If you notice, on the 3D reliefs, she took the time to stain them in a different shade from what the table was to be done in. It created a nice effect and helped to empasize the 3D.
The pic's are a little rough...sorry
All three tables are made from Oak and assembly is with glue...no screws or fastners.