Crosscut sled kerf insert

[Matt P]

Can anyone tell me where to get the plastic kerf "insert" for Glenn's crosscut sled in the picture?

http://www.sawmillcreek.org/attachme...2&d=1173332187 (http://www.sawmillcreek.org/attachment.php?attachmentid=59692&d=1173332187)

Quote: Originally Posted by glenn bradley http://www.sawmillcreek.org/images/buttons/viewpost.gif (http://www.sawmillcreek.org/showthread.php?p=690315#post690315)
I use a "dummy block" (same purpose) its the block at the rear center of the fence that the blade buries into (as opposed to your thumb):

[Mike Golka]

If that is what is on the left of the picture ( two extra) they look to be Melamine covered partical board. The holes in these match the one in the sled.

[Bill Huber]

If you will check your thread on making the sled I put a link to were you can get all that kind of stuff.

http://www.ttrackusa.com/mitertrack.html