View Full Version : How to attach cork?
Jim Fox
11-04-2007, 12:27 AM
Anyone have any thoughts on how to attach cork to ply? This is probably 1/4" thick cork.
Dick Bringhurst
11-04-2007, 12:44 AM
Contact Cement. Dick B.
David Duke
11-04-2007, 8:14 AM
Contact Cement. Dick B.
Yep............the spray on works great.
Tom Fortier
11-04-2007, 9:51 AM
I had the same question last winter when I needed to attach some 1/8" cork to a piece of homosote (sp??). I used contact cement, and it worked great. I tested on a small piece first.
Ellen Benkin
11-04-2007, 12:40 PM
3M makes a spray adhesive that works just fine. I don't know the name, but the can is green.
Keith Beck
11-06-2007, 5:48 PM
Anyone have any thoughts on how to attach cork to ply? This is probably 1/4" thick cork.
Jim,
I used a ready mixed epoxy type adhesive to adhere the 400 or so corks to this bulletin board. I can't remember the name, but it came in a silver squeeze tube that I picked up at Walmart. The price was right and so far it seems to be holding up pretty well.
http://i78.photobucket.com/albums/j114/ldoforcno/DSC02985.jpg
http://i78.photobucket.com/albums/j114/ldoforcno/DSC029861.jpg
Keith
Chris Padilla
11-06-2007, 6:12 PM
That's a slick corkboard, Keith!
Scott Loven
11-06-2007, 6:14 PM
I prefer using cork screws on my corks!
Jack Gingerich
11-06-2007, 9:51 PM
this is an "after the cork screw" application:)
Keith Beck
11-07-2007, 12:31 PM
That's a slick corkboard, Keith!
Thanks Chris, I'm pretty happy with how it turned out. I made a couple of other wall hangings that used corks too, but I haven't taken a picture of those yet. BTW, in case you wondering, no, I didn't drink all that wine myself! :D
Keith
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.