Dick Strauss
11-03-2007, 2:07 AM
Well,
I finally borrowed a digicam to take some pictures of a few pieces.
It is a maple HF about 9" in diameter and 6" high. It has little bit of everything (some spalting, curl, bark inclusion, etc). It was sanded to 400 grit and wiped with a secret thinned epoxy recipe developed by a friend. It has not been buffed but I may decide to do it later. The fourth pic looks too pink but I'm too tired to fix it.
FYI-I plan to add a lid w/finial once the right piece of wood comes along...
74563 74565 74566
I finally borrowed a digicam to take some pictures of a few pieces.
It is a maple HF about 9" in diameter and 6" high. It has little bit of everything (some spalting, curl, bark inclusion, etc). It was sanded to 400 grit and wiped with a secret thinned epoxy recipe developed by a friend. It has not been buffed but I may decide to do it later. The fourth pic looks too pink but I'm too tired to fix it.
FYI-I plan to add a lid w/finial once the right piece of wood comes along...
74563 74565 74566