Need Band Saw Blade Recommendation

[Steve Mellott]

I plan to cut several Christmas figurines on my 14" 1HP Jet bandsaw. The blade is 93.5" long and given the curves on the figurines, I think I need a 1/4" blade. I will be cutting the figurines out of 5.5" walnut. Can anyone recommend a band saw blade for this application as well as a source for that blade? Thanks very much!

Steve

[Dave Falkenstein]

Call these folks and get your recommendation and your blade at the same place:

http://www.suffolkmachinery.com/

[Steve Mellott]

Dave:

Thanks for the advise. I called Suffolk and they were very helpful. They are shipping the blade today. Thanks again.

Steve

[Dave Falkenstein]

I am happy to know that you are happy.