View Full Version : Need Band Saw Blade Recommendation
Steve Mellott
11-02-2007, 8:52 AM
I plan to cut several Christmas figurines on my 14" 1HP Jet bandsaw. The blade is 93.5" long and given the curves on the figurines, I think I need a 1/4" blade. I will be cutting the figurines out of 5.5" walnut. Can anyone recommend a band saw blade for this application as well as a source for that blade? Thanks very much!
Steve
Dave Falkenstein
11-02-2007, 10:28 AM
Call these folks and get your recommendation and your blade at the same place:
http://www.suffolkmachinery.com/
Steve Mellott
11-02-2007, 12:09 PM
Dave:
Thanks for the advise. I called Suffolk and they were very helpful. They are shipping the blade today. Thanks again.
Steve
Dave Falkenstein
11-02-2007, 12:27 PM
I am happy to know that you are happy.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.