A follow up on the outfeed roller table

[Doug Morgan]

I wondered why the HTC roller table did not fit the SawStop table saw and emailed the company to find out why.

Here was there reply:

Good Morning,

Thank you for your interest in our products. The old style table does not fit, as the dust port is too high. We have re-designed and now the main frame is adjustable and can be fitted to any table saw. Unfortunately Grizzly does not have this item, nor does Amazon.com. If you go to the website, you can find a dealer in your area, or you can order from Woodcraft.com, or Woodworkers.com.

If I can be of further assistance, please let me know.

Thank you,

Bonnie Stoklosa
Customer Service


HTC Products Inc./Sales
332 E. Lincoln Ave.
Royal Oak, MI 48067
800-624-2027 Ext. 225
248-399-6185
248-399-8419 FAX
www.HTCProductsInc.com (http://www.HTCProductsInc.com)

[Doug Shepard]

Cool. I wondered if it might be the dust port location. Too bad the adjustable one wasnt out when I bought one. The old style doesnt interfere with the PM66 4" dustport but really complicates wanting to enlarge that port to 6". So are you going to pull the trigger?