New Escoulen Eccentric Chuck

[Jon Lanier]

Wandering around you tube I found this new video on the Escoulen Eccentric Chuck. it has counter weights to stop vibration.

http://www.youtube.com/watch?v=Jni6Qnth844

[JerHall]

Looks like you can only change to a new axis that is parallel to the lathe axis. or sweeping cylinders with the new axis. Can't angle the axis or sweep cones with the new axis. Is that how you see it? Looks as tho the innovation is in the variety of fixings and the counterweights.