Splitter for my pm 66

[Ralph Steffey]

Does anyone know if the delta splitter (1349941) this is the $30.00 one
will fit on my powermatic PM-66?

[David LaRue]

Does anyone know if the delta splitter (1349941) this is the $30.00 one
will fit on my powermatic PM-66?


No it will not fit. They used to make one years ago, but do not any longer. Bies makes one that will fit out of the box though at aprox $130.

Dave

[John Weber]

Ralph,

I used one my 66. I cut off part of one of the legs, enlarged the hole, and did a little grinding. I then used the 66 bolt to hold it in place, you can't use the original splitter holder. It worked great, but I finally switch to a Biesemeyer splitter so I could have toolless removal. Easy to do and I thought it worked well.

John

[John Weber]

Here is a picture (I sold it on ebay awhile back).

http://www.weberwoodworking.com/picsw04/powermaticsplitter2.jpg

John

[Greg Heppeard]

The Biesmeyer B78440 fits saws that were made after August 2000 and the B78441 fits the pre August 2000 models...you can call Jet with the serial number on your saw to find out when it was made