Mike Heidrick
10-24-2007, 10:48 PM
I got one of these after seeing it in use at a friends shop with his shaper. I have the delta shaper jig as well and there is no comparison to build quality - the SF is much nicer. Woodstock Int. actually makes it as part number W1500 and Grizzly sells it as part number G3642. Man it is a nice jig. I bought mine from ebay for $50 missing the hold down clamp and purchased the missing parts from Grizzly for $30. Tonight I used it with my tablesaw and cut the angle on a piece of 1.75" roundover moulding for my computer desk - I am replacing the junk MDF moulding with Oak and tonight I made a test piece. I am sure there are other ways to accomplish the cut but it worked great with this jig and clamp. This is definately not just a shaper jig. Read the manual on it on Grizzlys site to see some of the other uses.
Anyone else use it?
http://images.grizzly.com/grizzlycom/pics/jpeg500/g/g3642.jpg
Anyone else use it?
http://images.grizzly.com/grizzlycom/pics/jpeg500/g/g3642.jpg