Grizzly TS inserts

[Sean Troy]

Hey all, does anyone know where I can get TS inserts for a Griz cabinet saw? i thought I'd make some zero clearence inserts. Thanks, Sean

[Chuck Wintle]

Have you checked Lee Valley? They have several models. :)

[Jim Becker]

Sean...make your own. 1/2" MDF works well or you can buy some inexpensive "slippery" plastic cutting boards and do the same. Rough cut on band saw and then use the factory insert as a template with a router with a pattern bit in the chuck.

[Brian Kent]

I agree with Jim. Even I could do it.

If you want to buy one, Grizzly makes them:
http://www.grizzly.com/products/H0628

[Phil Harding]

Grizzly 10 cabinet saws (left tilt) take the same insert as the Jet Xacta left tilt saw. You find these at Woodcraft and Rockler if you don't have time to make your own.

-- Phil