A Tyler-inspired platter

[John Miliunas]

With all the ribbin' I always get from Tyler 'bout "cheese", I thought I'd throw a block of Walnut on the spinny thing and turn something both, for cheese AND crackers. :D It's just under 11" diameter and @3" tall at the center. I kept the main body of the platter at roughly 1/4", as I perceive it getting some use in possibly "less than delicate" surroundings. :D Finish is a couple coats of Salad Bowl finish applied on lathe (NO, Tyler. Not ON the lathe, but on the piece while it was still mounted on the lathe! Sheeeesh.) Thanks for taking a peek. :cool:

[Tyler Howell]

John!!!!!!
You're making me hungry. Very nice my Friend. :rolleyes:
PS I'm moving down next to Dennis where I am appreciated(SP):D

[Tony Falotico]

Good looking turning John. Can't wait to get my spinny mini out of the box and running. I bought it 2 1/2 yrs. ago on clearance sale and haven't had a chance to take it out of the box yet! Hope it still works.

[John Miliunas]

Good looking turning John. Can't wait to get my spinny mini out of the box and running. I bought it 2 1/2 yrs. ago on clearance sale and haven't had a chance to take it out of the box yet! Hope it still works.

2-1/2 years???!!!! Tony! Fifty lashes with a wet staining rag! Get that puppy *outta'* the box and use a sharpened screwdriver if you have to, for a chisel, but get to turnin'! Do it quickly, before some other "needy" soul finds it and takes it off your hands! :cool:

[Jeff Skory]

Hi John,

Nice looking platter! I know nothing about spinning, so this may be a silly question, but do you need to hollow out the large block in the middle to help prevent splitting or is it solid?

And when I first joined this forum I thought you were a regular woodworker. :rolleyes: Sheesh. (but I still respect your talents) :D

Some day I may catch the fever if I can make enough room. I don't think my wife would let me put any of the tools in the living room like Tyler. What a cool house that must be. :D

Tyler, I haven't searched the forum, but do you have any pictures of your tools in the same room as your couch?

[Tyler Howell]

Tyler, I haven't searched the forum, but do you have any pictures of your tools in the same room as your couch?
Sorry no couch, we just sit on the work bench.

See what I can dig up.

[Jim Becker]

Excellent piece, John. Wisconsin is lucky to have you! But now you need a face shield/helmet that looks like one of those cheddar hats they were at the games...hee hee :D

[John Miliunas]

Hi Jeff,

Well, I really AM a regular WW. Really. Honest. I wouldn't lie to you. I will admit, though, turning is fun! And, with all the other workshop chores (non-building type) I've been into lately, the instant gratification, really helps to act as a "reminder" of why I have all these tools!

This particular piece started as one, whole junk. Nothing glued up or such and no, I had no issues with cracking. It was one, *real* dry hunk of Walnut, though!

Oh, and the tools in Tyler's living room? No, that's really another workshop and he just "lets" his wife put a couch and TV in there! :D :cool:

[Dale Thompson]

Hey Spring Green,
I really like your turning and its obvious utility. GREAT WORK!!

Ok. Now let's be honest. Which artisan up in Door County did you buy this from? Was it in Fish Creek, Ephraim, Egg Harbor, Bailey's Harbor, Washington Island or what? :confused:

Nice job, Spring. I just LOVE to see turnings with utilitarian applications. HMMMM! What did I just say?? ;)

Dale T.

[John Miliunas]

Uh, no, but my wood supplier gets some of his wood (some beautiful Maple) from someone out to Washington Island. Does that count? (Thanks, BTW!) :cool:

[Wolf Kiessling]

With all the ribbin' I always get from Tyler 'bout "cheese", I thought I'd throw a block of Walnut on the spinny thing and turn something both, for cheese AND crackers. :D It's just under 11" diameter and @3" tall at the center. I kept the main body of the platter at roughly 1/4", as I perceive it getting some use in possibly "less than delicate" surroundings. :D Finish is a couple coats of Salad Bowl finish applied on lathe (NO, Tyler. Not ON the lathe, but on the piece while it was still mounted on the lathe! Sheeeesh.) Thanks for taking a peek. :cool:

That is one fine looking hunk of walnut, John. I really like the detail work. One of these days I'm gonna have to spin out something other than bowls or the occasional table leg.

Wolf

[Dennis Peacock]

John!!!!!!
You're making me hungry. Very nice my Friend. :rolleyes:
PS I'm moving down next to Dennis where I am appreciated(SP):D

Tyler ol' buddy....you just come on down here and we'll treat you "right".! Don't let John mistreat you like that...teasing you with that roundy-round thing he did up on the spinny thing of his.....Shoot...just move your house down here and I will help you get it remodeled on the inside so it won't take you so long.... ;)

Your ol' buddy Dennis....spreadin' the southern hospitality. :D

[Mark Singer]

John,
Excellent your the spin docta'!

[Dennis Peacock]

John,

very nice turning there. I like the walnut and you did REALLY good on it. I am proud of you and what you turned. Thanks for posting the pic.

[Tony Falotico]

2-1/2 years???!!!! Tony! Fifty lashes with a wet staining rag! Get that puppy *outta'* the box and use a sharpened screwdriver if you have to, for a chisel , but get to turnin'! Do it quickly, before some other "needy" soul finds it and takes it off your hands! :cool:


Chisels aren't the hold up, got a real nice set of five at a garage sale 'bout five, maybe six years ago for $5 in anticipation of getting a spinny thing some day.

Problem is TIME. This work routine is a real pain, constantly gets in the way of good shop time. Thought about giving up the work thing, but then I won't be able to buy tools. Also, I kinda like to eat (way to much) and it's nice to sleep in a warm dry place, specially in the cold winters. But that banker dude says if I don't give him that thing he calls "mortgage payment" each month I can't live in my house anymore. He's got some nerve being like that. So's I decide to work more and make more money so I can get rid of the banker dude faster..... but then the IRS dude wants more and I end up with less. Then I can't get as many new tools. Can't seem to win no matter what I do!

[Terry Quiram]

Nice platter John. Doesn't look like you need to practice, practice, practice like Dennis and I. :D If you hollowed the center you could fill it with hot mustard. WAH! Hot mustard and aged Chedder, man thats heaven.

Terry

[John Miliunas]

Many thanks! You's guys are WAY too kind! It was fun, but if I plan on doing "bigger" stuff, I'm afraid that little Yorkcraft (Jet 1236 look-alike)just isn't going to cut it. Stalled it out a few times, especially when getting to the outer edge. Little 1/2hp just don't do it real well. Hmmmm...Maybe I should try rigging up one of them million hp Craftsman shop vac motors? :D Oh well. One of these years....A huskier lathe is on "the list", but it's kind of down there on the priorities. Well, unless I find a real good deal on a used one! (I need to find me a Jim Becker clone 'round these parts! :D ) :cool:

[Dale Thompson]

Many thanks! You's guys are WAY too kind! It was fun, but if I plan on doing "bigger" stuff, I'm afraid that little Yorkcraft (Jet 1236 look-alike)just isn't going to cut it. Stalled it out a few times, especially when getting to the outer edge. Little 1/2hp just don't do it real well. Hmmmm...Maybe I should try rigging up one of them million hp Craftsman shop vac motors? :D Oh well. One of these years....A huskier lathe is on "the list", but it's kind of down there on the priorities. Well, unless I find a real good deal on a used one! (I need to find me a Jim Becker clone 'round these parts! :D ) :cool:

Hey Spring Green,
You turn a platter like THAT and then you criticize your tools. I've got a PM 3520 and I can't turn a corner without getting "caught". :o How condescending can you be to decent, hard-working, woodworking challenged folks like ME??

I've heard that they have some nice wood out on Washington Island. My problem is that it's a long swim from Gill's Rock across the Porte de Mort (Death's Door) to the Island. I'm already a shriveled up old coot. I don't need any more wrinkles. :(

Again, a very attractive piece!!

Dale T.

[John Miliunas]

Hey Spring Green,
You turn a platter like THAT and then you criticize your tools. I've got a PM 3520 and I can't turn a corner without getting "caught". :o How condescending can you be to decent, hard-working, woodworking challenged folks like ME??

Again, a very attractive piece!!

Dale T.

Thanks Dale, but me thinks you're "laying in the weeds" again! I'll bet that once you "turn that corner", there's no catch and it's as nice a piece as the flat work you "slipped up" on and posted earlier on! I know your kind...Just like Lombardi. "Don't show them everything up front, but then, Let 'em have it!" :D "Woodworking challenged..." my foot! And furthermore, sporting a 3520, what in blazes would you know about a little, anemic, light-weight machine like mine?! Hmmmm???? This thing ain't *half* of your PM! That's a machine dreams are made of and, in my case, that's as close to one I'm gonna' get to, as well! But, that's OK too. I just need to remember to try and keep stuff a little smaller. Thanks again for the kind words. Coming from you, that'd be an honor! :cool:

[Lars Thomas]

Nice looking platter. Beautiful hunk of wood. Probably even makes 'Kraft' cheeze taste better. ;)