Out feed roller sytem- you can do it!

[Brian Weick]

Just an idea to all you fellow woodworkers out there with table saws. I can get these rollers if anyone wants to do what I did. they sell for $5.50 normally, I can get them from my local company for $1.90 + NY tax $2.15 if you want them- there are 89 left - I couldn't pass up in these. the guy that ordered them only needed 100 , he ordered 200 and is letting them go for the price I quoted above. If you want to fabricate a different method for outfeedl , that can be done as well, at least you'll have the rollers to do it with. Just thought I would pass this on. I had 2 other out feed rollers that were OK ~ now a 4x8 sheet glides write through the TS effortlessly. What a difference!
Brian

[Karlan Talkington]

Would this be local pick up only? I'm in Northern Virginia and could use a set.

[Brian Weick]

To all of you that are interested ~ I will ship them , but I have to find out what the shipping is first. As long as I get the payment first-including shipping~ I have no problem.
They are high grade rollers , spring loaded 1/4" pin and smooth. I already have Jeremy getting 12 - so i will have to see what is left, I Don't know what you guys are going to do with them ~ but you will be pleased! I am thinking of taking the whole lot so they don't go ~ they are in a hard to find spot in the display room and I told Craig "selfishly" that it's a great spot to keep them, but I don't know what he's going to do. I'm going to call him today to see if we can't work something out. They are 12-1/2" in length and 1-3/8" diameter steel roller. :D
Brian:)

[Greg Pavlov]

... and, I meant to add, thank you for considering doing this.

[Josh Youngman]

Where in NY are you located, I might be interested in a few.

[Tom Veatch]

Brian, you have a PM

[Brian Weick]

Greg ( the distributor wholesaler) put the whole lot aside for me today I am waiting to hear back from him on how many there are-.1/2 hr, he thinks around 100 , but I am waiting for confirmation.

So far here is the order from first to last:

Josh-? you need to get back to me? 2?
Jeremy C -12
Greg P-12
Tom W-24
Roger O-24
Scott L -10
Karlan T-12

That's 94 so far - when there gone there gone.:eek:
Brian

[Brian Weick]

Greg ( the distributor wholesaler) put the whole lot aside for me today I am waiting to hear back from him on how many there are-.1/2 hr, he thinks around 100 , but I am waiting for confirmation.

So far here is the order from first to last:

Josh-? you need to get back to me? 2?
Jeremy C -12
Tom W-24
Greg P-12
Roger O-24
Scott L -10
Karlan T-12

That's 94 so far - when there gone there gone.:eek:
Brian


there are exactly 100 rollers there are 6 left for those that are interested.

[Brian Weick]

pm your zip codes , address so I can figure the shipping out. I will pick the rollers up Monday morning, figure the shipping to each one of you and then get back to you. Once I figure out the total I will pm you , Money orders are fine. for all those that missed out - let me see what I can do - I'll talk with my Distributor- hopefully - there is another mistake laying around somewhere. New- 5.50 and he won't budge - he's breaking even on these- Nice man though- I do business with him regularly ,so I will talk with him Monday about possibly finding some more in his massive :eek: warehouse.
Brian

[Randal Stevenson]

PM'ing on the last six.

[Tom Veatch]

Greg ( the distributor wholesaler) put the whole lot aside for me today I am waiting to hear back from him on how many there are-.1/2 hr, he thinks around 100 , but I am waiting for confirmation.

So far here is the order from first to last:

Josh-? you need to get back to me? 2?
Jeremy C -12
Greg P-12
Tom W-24
Roger O-24
Scott L -10
Karlan T-12

That's 94 so far - when there gone there gone.:eek:
Brian

I guess you missed my PM from yesterday with zip code and quantity.

[Bert Johansen]

Brian, if you still have six left I'll take them. Or less, if any are left.

Bert Johansen
Wimberley, TX 78676

[Brian Weick]

I guess you missed my PM from yesterday with zip code and quantity.

Tom,
your in - althought that is definitly going to bump someone - I'll do the best I can guys! I have all the time and dates of the pm's I will post them in order to be fair, for those that didn't make it- let me see what I can do- prior post
Brian

[Brian Weick]

Brian, if you still have six left I'll take them. Or less, if any are left.

Bert Johansen
Wimberley, TX 78676
Bert,
I am doing this in order of pm sent to me requesting the rollers. I have not gotten all the zips for shipping charges and I am not waiting around ,so come Monday I'm off to see Greg , find the correct order , notification-, payment then shipped, if someone bails - there will be more I;ll see what I can do for you. I didn't realize the interest- I'm in the wrong business-LOL
Brian

[Brian Weick]

http://www.sawmillcreek.org/images/statusicon/pm_old.gif 10-18-2007 Rollers (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203329)
3:40 PM Karlan Talkington
http://www.sawmillcreek.org/images/statusicon/pm_old.gif 10-18-2007 Last 6 (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203325)
3:25 PM Randal Stevenson
http://www.sawmillcreek.org/images/statusicon/pm_old.gif 10-18-2007 Rollers (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203276)
10:50 AM Karlan Talkington
Messages: 8 http://www.sawmillcreek.org/images/buttons/collapse_alt.gif (http://www.sawmillcreek.org/private.php#top) Yesterday
http://www.sawmillcreek.org/images/statusicon/pm_old.gifhttp://www.sawmillcreek.org/images/icons/icon1.gif10-17-2007 Re: rollers (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203208)
10:51 PM Jeremy Chisholm
http://www.sawmillcreek.org/images/statusicon/pm_old.gif 10-17-2007 Rollers (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203204)
10:35 PM Scott Long
http://www.sawmillcreek.org/images/statusicon/pm_old.gif 10-17-2007 24 rollers, if available (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203159)
9:14 PM Roger Owen
http://www.sawmillcreek.org/images/statusicon/pm_old.gif 10-17-2007 Rollers. (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203148)
8:37 PM Tom Veatch

[Brian Weick]

http://www.sawmillcreek.org/images/statusicon/pm_replied.gif 10-17-2007 Re: Josh (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203122)
6:31 PM Josh Youngman

http://www.sawmillcreek.org/images/statusicon/pm_replied.gifhttp://www.sawmillcreek.org/images/icons/icon14.gif10-17-2007 Re: rollers (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203091)
4:09 PM Jeremy Chisholm
http://www.sawmillcreek.org/images/statusicon/pm_replied.gif 10-17-2007 Re: rollers (http://www.sawmillcreek.org/private.php?do=showpm&pmid=202990)
10:30 AM Jeremy Chisholm


FYI- I will not be posting any addresses -rest assured! this is the order as of late so you all can see for yourself. Just to be fair.

[Greg Pavlov]

http://www.sawmillcreek.org/images/statusicon/pm_old.gif 10-18-2007 Rollers (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203329)
3:40 PM Karlan Talkington
http://www.sawmillcreek.org/images/statusicon/pm_old.gif 10-18-2007 Last 6 (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203325)
3:25 PM Randal Stevenson
http://www.sawmillcreek.org/images/statusicon/pm_old.gif 10-18-2007 Rollers (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203276)
10:50 AM Karlan Talkington
Messages: 8 http://www.sawmillcreek.org/images/buttons/collapse_alt.gif (http://www.sawmillcreek.org/private.php#top) Yesterday
http://www.sawmillcreek.org/images/statusicon/pm_old.gifhttp://www.sawmillcreek.org/images/icons/icon1.gif10-17-2007 Re: rollers (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203208)
10:51 PM Jeremy Chisholm
http://www.sawmillcreek.org/images/statusicon/pm_old.gif 10-17-2007 Rollers (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203204)
10:35 PM Scott Long
http://www.sawmillcreek.org/images/statusicon/pm_old.gif 10-17-2007 24 rollers, if available (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203159)
9:14 PM Roger Owen
http://www.sawmillcreek.org/images/statusicon/pm_old.gif 10-17-2007 Rollers. (http://www.sawmillcreek.org/private.php?do=showpm&pmid=203148)
8:37 PM Tom Veatch

Please see the below, Brian:

On Wed, 17 Oct 2007 15:52:44 -0400, "BEW" <bw....@.............. (http://www.fastmail.fm/mail/?MLS=MR-**3044*;SMB-MF-TP=0;SMB-MF-SF=Date_1;SMR-MI=3044;SMR-PT=;Ust=c220cccd%21892041ae;SMR-FM=1;SMB-CF=237546;SMB-MF-DR=25;UDm=49;MSignal=MC-FromName*U-1*bweick7%40roadrunner.com)> said:
> NO greg,
> Why bother shipping, I can meet you somewhere- maybe Friday? I have
> to see how my work goes- I am pretty busy write now, but - Friday is a
> possibility ~ you let me know.
> Brian
>
> -----Original Message-----
> From: Greg Pavlov @ Sawmill Creek [mailto:gr....@............... (http://www.fastmail.fm/mail/?MLS=MR-**3044*;SMB-MF-TP=0;SMB-MF-SF=Date_1;SMR-MI=3044;SMR-PT=;Ust=c220cccd%21892041ae;SMR-FM=1;SMB-CF=237546;SMB-MF-DR=25;UDm=49;MSignal=MC-FromName*U-1*gregp%40fastmail.fm)]
> Sent: Wednesday, October 17, 2007 2:48 PM
> To: Bw.........@.............. (http://www.fastmail.fm/mail/?MLS=MR-**3044*;SMB-MF-TP=0;SMB-MF-SF=Date_1;SMR-MI=3044;SMR-PT=;Ust=c220cccd%21892041ae;SMR-FM=1;SMB-CF=237546;SMB-MF-DR=25;UDm=49;MSignal=MC-FromName*U-1*Bweick7%40Adelphia.net)
> Subject: Rollers
>
> This is a message from Greg Pavlov at Sawmill Creek (
> http://www.sawmillcreek.org/index.php ). The Sawmill Creek owners cannot
> accept any responsibility for the contents of the email.
>
> To email Greg Pavlov, you can use this online form:
> http://www.sawmillcreek.org/sendmessage.php?do=mailmember&u=22731
>
>
> This is the message:
>
> I would like 12 of them, but I am in the Buffalo NY area, so you would
> have to go through the hassle of shipping them to me, if you are
> willing
> to do so! I have a few uses for these........

[Brian Weick]

Check you pm's
Brian

[Brian Weick]

Here is the list from first to last and they are all spoken for, the actual count was 116 : @2.15 each. I will be getting the shipping today and list that for a total. Once that is listed , I need a money order and your address to ship the rollers. I will pm my address to you and once I receive the payment the rollers go out. :)
Brian
Customer date/time requested QTY Price Shipping
Jeremy C 10/17/2007 10:30am --- 12 25.80 will pm
Tom V 10/17/2007 6:31pm --- 24 51.60 will pm
Roger O 10/17/2007 9:14pm---- 24 51.60 will pm
Scott L 10/17/2007 10:35pm--- 10 21.50 will pm
Karl T 10/18/2007 10:50am--- 12 25.80 will pm
Randal S 10/18/2007 3:25pm---- 6? 12.90 will pm


Greg P - completed 10/19/2007 5:30pm nice to meet you Greg!

[Brian Weick]

Bert wanted 6 as well - are you willing to split the 16 left- 8 each?
Brian

[Randal Stevenson]

I thought more people wanted them after me, then just Bert. If no one after me wants more, then email me again. I just have a project which I know the 6 would be a more immediate need (was going to build them out of pvc otherwise).

TIA

[Greg Pavlov]

......
Greg P - completed 10/19/2007 5:30pm nice to meet you Greg!
Yes, thank you, and personal delivery too!

[Brian Weick]

Hi Creekers,
To all you guys that ordered the rollers - I sent a Pm - I will be giving you all the totals and as soon as I receive the payment - out they go after that.
to all those that missed out. I talked with Greg about the cost for a new order of rollers. If I order 10 $5.50 If I can get another order of 100 cnt I can can get a price of $2.50 per roller ~ that's only if I have a commitment from all that are interested. I probably could get even a better deal with 500cnt but - I am not changing my occupation from craftsman to packman-LOL. let me know if we can get enough interested in doing this., I'll hold another "Roller Rally":
Thank you,
Brian

[Brian Weick]

I am getting the shipping charges today and will need your address if you want them-I apologize to all for the delay ~ My father was hospitalized over this past weekend and i had to attend to him and his situation. He is doing a lot better and I took him back home Thursday - he's a great man and I would do anything for my dad.:)
I will pm all of you , or already have, that am either missing information or had some questions.
thank you
Have a great day!
Brian

[Brian Weick]

All packaged and ready to go, with the exception of Roger O ~ PU.
I will Pm all that ordered now, you have 2 options 7-10 day/2-3 day shipping quaotes - I will need a money order for payment, including shipping charges ( what ever option you choose) before they go out for shipping.
thank you and again sorry for the delay. I didn't charge anyone for my time and packaging - there only rollers, but next order - lets see if we can't get a larger volume to one location or possibly 2 to cut down on the time/packaging and I will probably get a better rate on shipping through UPS or Fedex.
Thank you
Brian

[Brian Weick]

To all that ordered:
all set Gentlemen- ready to go. If any of you want these rollers- as long as I get an order for 100cnt or better- I can do a lot better on the price- not like this deal but still a lot better than $5.50 each. I received a quote from Craig last week- $2.55 if I get a 100cnt.

[Brian Weick]

Karlan's order went out today :D , the rest will fallow as soon as I receive your payment. I am requesting a Delivery confirmation , at my expense,so I know you got them.
Thanks
Brian