Ross Lowry
10-16-2007, 7:30 PM
Here is some pics from a tool cabinet I made from some birch plywood.
I got the design from a wood magazine.
I didn't do as good of a job on the hinges as I would of liked.
There are some things I would do different if I had to do again, but this is probally the biggest project I have taken on so far.
Let me know what you guys think.
I got the design from a wood magazine.
I didn't do as good of a job on the hinges as I would of liked.
There are some things I would do different if I had to do again, but this is probally the biggest project I have taken on so far.
Let me know what you guys think.