View Full Version : Turn Your Own Hot Tub
Julie Wright
02-05-2004, 6:25 AM
http://www.franktross.com/weld_bowl.asp
Check out this link. Also should be some good Glue if you can find it. :)
Tyler Howell
02-05-2004, 8:51 AM
[Julie,
You turning people are very scary.....The world is flat!:(
Jason Roehl
02-05-2004, 9:11 AM
Tim "The Tool Man" Taylor would be very proud. Ruh-ruh-ruh!
Lemme see....got half-dead truck sitting around....hmmmmm.....
Kent Cori
02-05-2004, 11:10 AM
The secret behind the photo is that the guy doing the turning is only 6" tall.
Julie Wright
02-05-2004, 11:22 AM
Roflmao ;) :) ;) :D :)
Tyler Howell
02-05-2004, 11:54 AM
Roflmao ;) :) ;) :D :)
:confused:I don't know what that means???
Keith Starosta
02-05-2004, 12:07 PM
:confused:I don't know what that means???
ROFLMAO......
Rolling On Floor Laughin My A** Off
Glad to be of service. :cool:
Keith
Michael Ballent
02-05-2004, 1:23 PM
http://www.franktross.com/weld_bowl.asp
Check out this link. Also should be some good Glue if you can find it. :)
That is nuts. Of course the turners in the group are starting to look to their trucks and wondering.....
-Michael
Don Farr
02-05-2004, 1:26 PM
I sure would hate to be around when you get a "tool catch" on that. :eek:
Dennis Peacock
02-05-2004, 1:30 PM
I sure would hate to be around when you get a "tool catch" on that. :eek:
Don....you are so right!!!! Getting a catch while turning THAT would truly be <b>earth shattering!</b> Can you imagine standing next to that thing...well close enough to stick a gouge inside that thing at 500 RPM?!?!?!?!?! I belive I would have to change my pants. ;)
Paul Downes
02-05-2004, 3:50 PM
Can you believe it! The dummy in that picture isn't wearing a face shield. :D I wonder how high that would bounce should it come off the chuck.
Michael Ballent
02-05-2004, 5:34 PM
I do not think even a face mask would help him :D
-Michael
John Piwaron
02-05-2004, 7:30 PM
Holy crap!
Dale Thompson
02-05-2004, 10:55 PM
Julie,
I think that those folks should visit their doctor and get a prescription for Avatar. From what I have been told, that is the latest drug to fight the world-threatening plague called, "Turning Addiction". ;)
On second thought, I'm not sure that there is hope for ANY of us. :D
Dale T.
Jeff Skory
02-05-2004, 11:14 PM
Don....you are so right!!!! Getting a catch while turning THAT would truly be <b>earth shattering!</b> Can you imagine standing next to that thing...well close enough to stick a gouge inside that thing at 500 RPM?!?!?!?!?! I belive I would have to change my pants. ;)
Next to it? From what I can see he is standing INSIDE the bowl he is turning!!! :eek:
Tyler Howell
02-08-2004, 8:19 AM
Jules,
Do you know if there is a finished product of the hot tub project:confused: Snooped all over the sight and it eludes me if there is.
TX
Todd Burch
02-08-2004, 9:23 AM
OK, something just does not jive here. The article states:
"In all, 298 separate pieces of wood were fixed together using 1,213 gallons (7.5 litres) of glue"
Roughly, that means that for every piece of wood they used, they applied 4 gallons of glue to it. I don't think so. Must be typo - since I know that 1213 gallons is WHOLE lot more than 7.5 liters. I could believe 7.5 liters.
Maybe they meant to write "12-13" gallons.
Chris Johnson
02-08-2004, 11:09 AM
Maybe they are using a CA glue finish on that monster. :D It would take a bunch, but not those numbers. I suspect a minor typing faux paus.
OK, something just does not jive here. The article states:
"In all, 298 separate pieces of wood were fixed together using 1,213 gallons (7.5 litres) of glue"
Roughly, that means that for every piece of wood they used, they applied 4 gallons of glue to it. I don't think so. Must be typo - since I know that 1213 gallons is WHOLE lot more than 7.5 liters. I could believe 7.5 liters.
Maybe they meant to write "12-13" gallons.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.