View Full Version : cleaning polyweld

Craig Hogarth
10-04-2007, 10:36 PM
I goofed on an acrylic award and there's a nasty spot from the polyweld. Is there anything that can remove it?

Mike Hood
10-05-2007, 12:11 AM
Not sure anything can "remove it", but you might be able to polish it out with some elbow grease.

Frank Corker
10-05-2007, 6:23 AM
Craig I've done the same thing a few times, sometimes a little T cut will do the trick, the stuff you use for removing scratches from vehicles. Do a small area first on scrap and you will see with the firm polishing later with a soft cloth quite often remove this type of marking