Wolverine flat tool jig

[Dave McGeehan]

Has anyone tried and have any comments regarding the Wolverine flat tool sharpening jig? Flat Tool Honing Jig (http://www.oneway.on.ca/sharpening/honing_jig.htm) I'm mostly interested in using it to grind the initial bevel on my plane irons. I use a LV Mark II for the microbevel. I was going to buy the LV grinding setup Veritas® Basic Grinding Set - Lee Valley Tools (http://www.leevalley.com/wood/page.aspx?c=2&p=32975&cat=1,43072,45938) but I was also looking at the Wolverine grinding jig to use on my turning gouges and figuered if I bought the Wolverine grinding jig, I might as well buy their flat tool jig as long as there aren't many negative comments from the users.

Thanks,
Dave McGeehan