Show me your dovetail workstation/storage box please

[Jim Eller]

I am looking to build a workstation/storage box for my dovetail jig. At one time I saw a great looking one that had dovetails in it but can't seem to find it on a search.
If you have a dovetail workstation/storage box please post a pic if you would.
Thanks,
Jim

[Bill Wyko]

Eric Gustafson is the guy to talk to about that. When he got his set up the first thing he did was build a dovetail box for the jig. It's pretty darned nice for his first try.

[Michael Lutz]

There was one in Shopnotes a couple of issues ago. It was made out of plywood vs. being a solid wood dovetailed box.

Mike

[Eric Gustafson]

Jim PM'd me. I will post the pics of what I built. ( When Bill brings his camera over!) Mine is not a workstation, however. Just a box.

[Cliff Rohrabacher]

I am interested in this as well.

[Todd Hyman]

I'm also interested.

[James Phillips]

I'm also interested.

War Eagle Todd....

[Fred Giordano]

If anyone is interested I have the Shop Notes portable dovetail work station artilcle scanned as a pdf file and can email it to you.

[Jim Eller]

Fred,

I sent you a PM.

Jim

[Bill Wyko]

Jim PM'd me. I will post the pics of what I built. ( When Bill brings his camera over!) Mine is not a workstation, however. Just a box.
OK OK I have the box at my workshop. I'll take pics tonight and post tomorrow.:D

[Steve Sharp]

Fred, I'm interested in your file too.
Steve

[Bill Wyko]

Alright, with no further adieu. Here's Erics storage cabinet. I think he did a great job, especially for his first try.

[Bill Wyko]

The plate mounted to the bottom is designed to hold the jig in a vise. The channel in the back of the box is to lock the unit in place when stored in the box. I'm sure Eric will chime in and explain the rest. Some darned nice jointery for his first try too.:)

Woops. That Quilted maple is for an up comming project. we'll get to that at a later date.:D ;)

[Quinn McCarthy]

Fred

I am interested as well.

Thanks

Quinn

[Jim Eller]

Thanks for the post Bill.

That's nice!

Jim

[Eric Gustafson]

Alright, with no further adieu. Here's Erics storage cabinet. I think he did a great job, especially for his first try.

Thanks Bill.

Aftrer seeing the Shopnotes workstation/storage, I want to build that. Too bad I did not have those plans at the time.

I built this box so I could try out through doves and have somewhere to put this thing so it didn't get bent up or have lost parts.

[Justin Bukoski]

After seeing those pics I feel kinda inadequate - I just hang mine on a peg board...

[Mike Spanbauer]

Mine sits on a shelf :P However, one of the members who hasn't stepped up yet but has contributed a lot to the woodworking crowd:

Tom Hintz:
http://www.newwoodworker.com/d4case.html

Once I get to it, I'm going to mimic Tom's design. Nice and clean :)

mike