John Nowack
09-25-2007, 9:34 PM
At woodturners assocition meeting last week. One of the guys that does a local show on public television in Oklahoma had a set of snowmen. The basic concept seems like something I would like to try as a new turner. The buttons and eyes lost me a little and I was not sure how to turn the small buttons.
The main question is about "of center" turning. the arms were very cool and look almost like tiny rose stems with the tips cut off of the thorns (hard to describe) Everywere online about offcenter turning is about oval shaped bowls. Dors anyone know of a good place to recearch this.
As bad as my lathe wabbels i figure every peice I do is some form of off center turning so --thought I might try it out if it is not to complicated
The main question is about "of center" turning. the arms were very cool and look almost like tiny rose stems with the tips cut off of the thorns (hard to describe) Everywere online about offcenter turning is about oval shaped bowls. Dors anyone know of a good place to recearch this.
As bad as my lathe wabbels i figure every peice I do is some form of off center turning so --thought I might try it out if it is not to complicated