PDA

View Full Version : help



marge hawthorne
09-23-2007, 2:01 AM
is there a corel draw book for dummies on laser,s

Frank Corker
09-23-2007, 4:45 AM
Well Marge that's not confusing is it? Is it lasers for dummies or Corel Draw for dummies? Are you talking about tutorials for lasers using Corel Draw.... if it is you could try the sample club at Epilog where they give you some simplified directions into creating one or two small jobs, look here

http://www.epiloglaser.com/sample_club.htm

Advice on Corel resources are shown here

http://www.epiloglaser.com/corel_resources.htm

and a few tutorials in Corel Draw here

http://www.epiloglaser.com/tech_library.htm


.

Luke Phillips
09-23-2007, 6:19 AM
Mike Clarke's manual for Corel X3 specifically written for laser users. I found it to be very helpful and worth the $119.00 from Laserbits. It has a recource CD - also helpful.

George Elston
09-23-2007, 9:14 AM
Another great link I picked up here is http://www.engravingconcepts.com/swf_files/
Start with "defaults.html" then take a look at the other tutorials ("name".html)

Jim A. Walters
09-23-2007, 2:03 PM
Best education you could ever receive is reading through ALL of the archived pages of this forum.

I would like to thank all the great people on this forum for generously posting tricks, tips, and helping me through the learning curves of using CorelDRAW and my laser!