TS mobile base question

[Tom Elgin]

I'm needing to reduce my workspace so I purchased a Shop Fox mobile base for my table saw(CM 22124). Should I remove the leveling feet and place the cabinet directly on the base ledge or leave the feet on?

[glenn bradley]

Depends on how your floor is. I left the feet on my previous saw and got it as level as possible in the base while standing in the spot where I would normall use it. This also eliminates wobble from a not-so-flat sheet metal seam setting over a large area of the base's corner.

[John Browne]

THe levelers (IIRC) are what lock it down when you want to use it. You don't want it rolling around when you're ripping thick stock!