Anyone know where to get square tubing caps in low volume?

[Lewis Cobb]

I'm designing a steel lumber rack for my workshop and would like to use those black plastic end caps to give the project a "finished" look. Caps & Plugs are a source for these things - if you want to load up with 2000 of them. Anyone know a place that might sell them in lower qty?

Thanks
Lewis

[Josiah Bartlett]

McMaster-Carr has them.

http://www.mcmaster.com

[Lee Schierer]

I'm designing a steel lumber rack for my workshop and would like to use those black plastic end caps to give the project a "finished" look. Caps & Plugs are a source for these things - if you want to load up with 2000 of them. Anyone know a place that might sell them in lower qty?

Thanks
Lewis

Ask for samples. We did that for a project at the place I worked last year. We had to have several people ask for the same thing to get enough, but we received 2 dozen caps all together.

[Dave Bonde]

I would check with Outwater Plastics. Dave

[Lewis Cobb]

Thanks for the tips fellows. We have done the "samples" route at my work as well - but I think I would be stretching my limits on this project. Worth a try though.

Thanks again
Lewis

[Bob Hoffmann]

Why not make a wood plug for them -- with the body the size of the hole, and a larger "cap" to prevent it from falling in the hole -- you could paint it the color of the post to blend in.

Just another option ...

[Carroll Courtney]

Here,we have a place that is call Triple S Steel,and they sell all kinds of stuff for steel.I'm sure a place that sells steel to people that makes iron rod fences is around your location.

[Ed Peters]

www.outwatercatalogs.com (http://www.outwatercatalogs.com).

Ed