View Full Version : Updated the blog: Details of my home-made spray booth
Al Navas
09-20-2007, 1:25 PM
First, Marc, The Wood Whisperer wanted some additional info, as he "gets questions about making a home-made spray booth all the time" (his words-you can view his comments at my blog). Marc has already indicated that the details are good enough :cool: .
A little while later, Warren also requested some information. Soooo, I made what seems to be a fairly complete entry, photos and all, due to their popular demand http://www.forums.woodnet.net/ubbthreads/images/graemlins/yellowbiggrin.gif .
Please let me know what you think. Thanks!
.
Mike Spanbauer
09-20-2007, 2:02 PM
Nicely done Al. Looks similar to the unit that was featured in a magazine a number of years back (FWW, Wood, ??). Looks like it does the job well. I wish I could make something permanent like you've done, would certainly ease finishing operations significantly :)
Some day...
mike
Jim Becker
09-20-2007, 3:13 PM
For the benefit of SMC members, could you post some of the content details here, too? Thanks in advance.
Jim
SMC Moderator
Al Navas
09-20-2007, 7:17 PM
Good point, Jim! Thanks for the reminder.
About a year ago, LOML and I moved a bunch of old tools from what we had dedicated as a finishing room, but became a store room - it just happened, as we were busy with a bunch of other stuff.
Long story short, we finally completed the finishing room, and I posted in August 2006 right here (http://www.sawmillcreek.org/showthread.php?t=40466&highlight=spray+velcro). This post generated some interest, but it did not have many photos relevant to the booth itself.
Late last night, I updated my blog to include some details of the construction of the booth - the text of the actual construction materials can be found at the blog.
Now to the details:
1. This is yours truly, spraying the latest cabinet creation in the booth:
http://blog.sandal-woods.com/images/98838-91456/SprayingCabinet.JPG
2. This photo shows the exhaust fan components - notice how the flange on the tube is taped with duct tape to the foam insulation sheet that is the back of the booth:
http://blog.sandal-woods.com/images/98838-91456/DaytonTubeaxialExhaustSystem.JPG
3. In my original post here on SMC I simply described how I used wide Velcro strips to create "hinges" to hold together the sides and the booth back. This is dditional detail - notice that I have also used duct tape on the edge of the fom sheet, to protect the edge and to stiffen the sheet:
http://blog.sandal-woods.com/images/98838-91456/VelcroHinges.JPG
4. Finally, the original photo, showing the spray booth in its entirety, and before I managed to get the floor dirty :D :
http://blog.sandal-woods.com/images/98838-91456/Finishing_room_spray_booth_1.JPG
These are probably the best photos that summarize how the booth is put together. Thanks for looking!
.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.