View Full Version : Hard & Soft Woods Finished Together
Ross Lowry
09-18-2007, 3:02 PM
Hello.
I am making an endtable that in the center is soft wood(Kauri), and the outside is a hard wood(Morado).
Will I run into a problem when putting the finish on them together?
Thanks
Ed Peters
09-18-2007, 3:09 PM
be any difficulty at all, assuming they are both getting the same treatment.
Ed
Ross Lowry
09-18-2007, 3:12 PM
Thanks Ed thats what I wanted to hear!
I just wasn't sure if the softer wood would soak up more than the harder and cause problems.
Joe Pelonio
09-18-2007, 5:20 PM
I've just done this with poly on a 4 veneer inlay piece and some parts did suck up more than others, but just on the first coat. I ended up with 4 coats and by the 3rd the sheen was nice and even among all the woods.
Jim Becker
09-18-2007, 6:00 PM
I just wasn't sure if the softer wood would soak up more than the harder and cause problems.
It could...or maybe not. 'Depends upon the individual species. DO A TEST PIECE from scrap before you try to finish your real project... ;)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.