PDA

View Full Version : Shop Sabre Laser



Doug Griffith
09-09-2007, 8:28 PM
I'm curious if anyone has experience with a Shop Sabre Laser or has other suggestions. I'm looking into a solution for a supplier. They want to cut down .020" to .125" plastic (PETG, ABS, acrylic) into multitudes of sizes. No engraving or tight accuracy is required. Edge quality is irrelevant because the sheets will be further processed by the end user. They need at least a 48" by 96" bed. I'm looking for an open architecture machine (ie. gantry router type) because it will need some modifying to tie into their workflow.

Cheers

Bruce Volden
09-10-2007, 11:23 AM
Doug,

Funny thing, I just made an inquiry into their router system last week and am awaiting some brochures. Small world. You can find more info on the ShopSabre @ CNC Zone on the 'net. People have compared them to the Techno systems (which are highly rated I believe) only with some newer and better options!! Also cheaper! Keep us in the "loop".

Bruce